SPC-600 Truck Mounted Water Well Drilling Rig

General Description

1.SPC-600 Truck Mounted Water Well Drilling Rig is a truck mounted drilling rig.
2.All components of SPC-600 Truck Mounted Water Well Drilling Rig including Diesel, gear box, transmission box, rotary table, hoist, dual hydraulic cylinder -feed mechanism of steel cable, mast, mud pump are mounted on the" STEYR" brand truck.
3Main drive of SPC-600 truck mounted water well drilling rig is mechanical transmission. Control mechanism adopts hydraulic operation and mechanical operation.
4.Main operating mode of SPC-600 truck mounted water well drilling rig is rotary –mud positive cycle drilling. Equipped with other drilling tools, SPC-600 truck mounted water well drilling rig could also use other drilling ways. The drilling rig could be available in clay, sand, gravel, rock and bedrock.
5.During the initial process, pressurizing the drilling tools by pressure mechanism could help increase shallow hole drilling efficiency. Until the drilling tools weight is more than the essential pressure, decompression drilling should be used.
6.The rotary drilling openings the early auxiliary pressure drilling to improve into the hole drilling efficiency, with the hole depth increase when the weight of the drill exceed the necessary that add the pressure of the drilling can realize drilling currently decompression.
7.SPC-600 truck mounted water well drilling rig is equipped with a main hoist, a secondary hoist and a tool hoist. The main hoist is used to lift drilling tools and down hole tubes. The secondary hoist is used for driving percussive earth excavator or other coring tool and sand reel to extract sands sample or core and silt in the well. The tool hoist is used for elevating the movable table and other tools to save labor time.